1.Main functions of the equipment
(1) This machine can cold-press scraps of various thicknesses, scrap steel, waste oil drums, dismantled car shells and other metal waste into blocks under normal conditions, making transportation, loading and unloading and storage easier.
(2) Each moving part is hydraulically driven, working smoothly, and the working pressure of the hydraulic system is ≤25MPa:
(3) PLC control operation is simple, convenient, safe and reliable;
(4) The equipment uses three-phase electricity 380V, 50Hz, 60Hz (optional)
2.Main technical parameters of the equipment
| 1
|
Master cylinder
|
Model | YG340/250 | Quantity | 2 | ||
| Nominal thrust | 254T×2 | Itinerary | 750/700mm | ||||
|
2
|
Side pressure cylinder |
Model | YG220/160 | Quantity | 2 | ||
| Nominal thrust | 106T×2 | Itinerary | 2000/1900mm | ||||
|
3
|
Door cover cylinder
|
Model | YG180/120 | Quantity | 2 | ||
| Nominal thrust | 71T×2 | Itinerary | 1720mm | ||||
|
4
|
Door lock cylinder
|
Model | YG125/70 | Quantity | 2 | ||
| Nominal thrust | 34T×2 | Itinerary | 75mm | ||||
| 5 | Compression chamber dimensions | 2500×2000×1200mm | |||||
| 6 | Bag cross-sectional dimensions | 500×500mm/600×600mm | |||||
| 7 | Single cycle time | About 120 seconds/each time | |||||
|
8
|
Electric Motor
|
Model | Y200L-4 | Rated Power | 30KW | ||
| Rated speed | 1480rpm | Quantity | 2 | ||||
| 9 | Hydraulic system design pressure | 28MPa | |||||
|
10
|
Hydraulic Pump
|
Model | A4V160 | Rated pressure | 31.5MPa | ||
| Nominal displacement | 160ml/r | Quantity | 2 | ||||
3. Working conditions of the machine
(1) Power supply: three-phase AC, voltage 380V (± 10%), frequency (optional) 50Hz, 60Hz (± 2%);
(2) Working medium: L-HM46 or L-HM68 anti-wear hydraulic oil;
(3) Altitude below 2500 meters;
(4) Ambient temperature -10℃ to 40℃;
(5) Humidity: When the ambient temperature is ±20℃, the relative humidity shall not exceed 90%; when the ambient temperature is ±40℃, the relative humidity shall not exceed 50%.
