1.Main functions of the equipment
(1) Suitable for shearing various low-carbon steel plates, household scrap steel, scrapped cars, scrapped shipboards, industrial flower plates and non-ferrous metals, etc.
(2) Each moving part is hydraulically driven, with stable operation, high shearing pressure and high shearing efficiency. The working pressure of the hydraulic system is ≤25MPa;
(3) PLC control operation is simple, convenient, safe and reliable;
(4) The equipment uses three-phase electricity 38OV, 5oHz, GOHz ( optional )
2.Main technical parameters of the equipment
| 1 |
Shearing cylinder |
Cylinder model |
YG 530/400 |
Quantity |
3 units | |||
|
Nominal pressure |
617T×3 units |
Itinerary |
1325mm | |||||
| 2 |
Pressure cylinder |
Cylinder model |
YG 320/250 |
Quantity |
2 units | |||
|
Nominal pressure |
225T×2 units |
Itinerary |
1400 mm | |||||
| 3 | Optional |
Hydraulic motor |
Model |
JMDG16-2400B |
Quantity |
1 units | ||
| Push cylinder |
Cylinder model |
YG 220/160 |
Quantity |
1 units | ||||
| Nominal pressure | 106T×1units | Itinerary | 7850 mm | |||||
| 4 |
Material box size (length x width x height) |
8000×2700×1200 mm | ||||||
| 5 |
Cut width |
2800 mm | ||||||
| 6 |
Cut frequency (theoretical) |
3.5 times/min | ||||||
| 7 |
Maximum cut size |
700/1305mm | ||||||
| 8 | Theoretical design pressure | 28 Mpa | ||||||
| 9 |
Actual working pressure |
21-25 Mpa | ||||||
| 10 |
Power required by the main motor of the equipment |
90KW x 4 units = 360KW (with quick filling valve) | ||||||
| 11 | Power supply standard | 380/3 phase 50Hz | ||||||
| 12 |
Motor |
Model |
MSJ-ZMVT-360M |
Power |
90KW | |||
|
Speed |
2200 rpm |
Quantity |
4 units | |||||
| 13 |
Hydraulic pump |
Model |
HLKSOV 260 |
Rated pressure |
31.5 MPa | |||
| Rated flow | 260 ml/rev | Quantity | 8 units | |||||
| 14 | Cooling | Optional (□ water cooling, □ air cooling, □ air conditioning refrigeration) | ||||||
3. Working conditions of the machine
(1) Power supply: three-phase AC, voltage 380V (± 10%), frequency (optional) 50Hz, 60Hz (± 2%);
(2) Working medium: L-HM46 or L-HM68 anti-wear hydraulic oil;
(3) Altitude below 250 meters;
(4) Ambient temperature -10℃ to 40℃;
(5) Humidity: When the ambient temperature is ±20℃, the relative humidity shall not exceed 90%; when the ambient temperature is ±40℃, the relative humidity shall not exceed 50%.
