1.Main functions of the equipment
(1) Suitable for shearing various low-carbon steel plates, household scrap steel, scrapped cars, scrapped shipboards, industrial flower plates and non-ferrous metals, etc.
(2) Each moving part is hydraulically driven, with stable operation, high shearing pressure and high shearing efficiency. The working pressure of the hydraulic system is ≤25MPa;
(3) PLC control is simple, convenient, safe and reliable;
(4) The equipment uses three-phase 38OV, 5oHz, 6oHz (optional).
2.Main technical parameters of the equipment
| 1 | Shearing cylinder | Cylinder model | YG 400/280 | ||
| Nominal pressure | 352T×2 units | ||||
| 2 | Pressure cylinder | Cylinder model | YG 220/160 | ||
| Nominal pressure | 106T×2 units | ||||
| 3 | Optional | Hydraulic motor | Model | JMDG16-1600B | |
| Push cylinder | Cylinder model | YG 200/140 | |||
| Nominal pressure | 88T×1 units | ||||
| 4 | Material box size
(length x width x height) |
7000×1700×900 mm | |||
| 5 | Cut width | 1800 mm | |||
| 6 | Cut frequency (theoretical) | 3.5 times/min | |||
| 7 | Maximum cut size | 610/965mm | |||
| 8 | Theoretical design pressure | 28 Mpa | |||
| 9 | Actual working pressure | 21-25 Mpa | |||
| 10 | Power required by the main motor of the equipment | 68KW x 2 units=136KW | |||
| 11 | Power supply standard | 380/3 phase 50Hz | |||
| 12 | Motor | Model | MSJ-IR266IE48C | Power | 68KW |
| Speed | 2200 rpm | Quantity | 2 units | ||
| 13 | Hydraulic pump | Model | HLKSOV 200 | Rated pressure | 31.5 MPa |
| Rated flow | 200 ml/turn | Quantity | 4 units | ||
| 14 | Cooling | Optional (□ water cooling, □ air cooling, □ air conditioning refrigeration) | |||
3. Working conditions of the machine
(1) Power supply: three-phase AC, voltage SSOV (± 1o%), frequency (optional) sOHz,
(2) Working medium: L-HM46 or L-HM68 anti-wear hydraulic oil;
(3) Altitude below ⒛OO meters;
(4) Ambient temperature △0℃ to ℃;
(5) Humidity: When the ambient temperature is ±⒛℃, the relative humidity shall not exceed gO%; when the ambient temperature is ±1℃, the relative humidity shall not exceed
50%.
